Bb-electronics VESR4X4 - Quick Start Guide Manuel d'utilisateur télécharger pdf

PN9036R1_VESR4x4 _0712qsg

P#xxxx_Vlinx_VESR4x4_Serial Server_2511qsg

Install/Connect the Hardware

Quick Start Guide

Install/Run Vlinx Manager

Configure the Serial Server

General Setup

Enter a name for the serial server. This name will

show up in the serial server list in Vlinx Manager.

Change the login password if desired.

Enter The Network Settings

The serial server is configured at the factory to get an

IP address automatically (DHCP). If a DHCP server is

not available on your network, it will default to

169.254.102.39.

If a static IP is desired, uncheck the box “I want

DHCP to setup the network”. Enter the static IP,

Subnet Mask, and default Gateway information.

Setup the Serial Port Communications

For each serial port on the device: Select the

communications mode – RS-232, RS-422, RS-485

(2-wire), RS-485 (4-wire)

Select the communicationsparameters (Baud Rate,

Data Bits, Stop Bits, Parity and Flow Control) for your

serial device

Setup the Serial Port Network Protocol

Select the type of network protocol you want to use

for each port: TCP, UDP, VCOM or Paired Mode.

TCP: select whether the serial server will operate as

a Client or Server, then configure the required IP

address, port numbers and other related parameters.

UDP: configure the IP addresses, ports and other

related parameters for the devices you want to

receive data from and send data to.

VCOM:configure the serial port to act as a virtual

COM port on the PC. You must also add the VCOM

driver to the PC using the “Add” button in Vlinx

Manager.

Paired Mode:configure the serial server to be paired

with another serial server, configure it as either the

client or the server in the pair and set up the IP

address, port numbers,etc.

Setup Advanced parameters as necessary for your

applicationClick on the “Advanced” button to setup

serial and network timers and packet delimiters.

Save your configuration to the serial server

The device will re-boot after saving the settings.

Model: VESR4x4

USB to Serial Device

One Meter USB Cable

CD ROM with Drivers

Mount the serial server using panel or DIN rail mount

adapters.

Connect a 10 to 58 VDC power supply (6.0 W required).

Connect to the network (using a standard Ethernet cable or

fiber-optic cable):

Connect the serial device (using the appropriate cable for

your model):

RS-232 with DB9: straight-through for DCE device, null

modem for DTE device

RS-232/422/485 with terminal blocks

Install Vlinx Manager

Insert the Vlinx manager software CD into the computer.

The install program should automatically run.

Follow the prompts to install the software

RunVlinx Manager:

ClickStart>Programs>B&BElectronics>Vlinx>Vlinx

Manager>VESRSerial Server

The Discovery page opens

Select Network.

If you know the IP address, select:“The device is at this

address”, and type in the address.

If not,select “I don’t know the IP address of the device”.

Click on the Connect button. Vlinx Manager will search

for any serial servers on the network.

Select the serial server from the list.

click Login). The General setup page will appear.

Unpack your serial server from the shipping container.

Verify that all included items are present.

VlinxVESR4x4 module

CD with Vlinx Manager software and user’s manual

(2) Panel mount adapters and (4) mounting screws

DIN rail mount adapter and (3) mounting screws

This quickstart guide

1 2

Quick Start Guide 1

Résumé du contenu

Page 1 - Quick Start Guide

PN9036R1_VESR4x4 _0712qsg P#xxxx_Vlinx_VESR4x4_Serial Server_2511qsg Install/Connect the Hardware Quick Start Guide Install/Run Vlinx Manager Con

Page 2

Set up serial server as a TCP Server on serial port 1. Set serial port to RS-232 on serial port 1. Set to 9600 8-N-1 on serial port 1. Lo

Commentaires sur ces manuels

Pas de commentaire

Bb-electronics VESR4X4 - Quick Start Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires de communication Bb-electronics VESR4X4 - Quick Start Guide. B&B Electronics VESR4X4 - Quick Start Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de communication Bb-electronics VESR4X4 - Quick Start Guide