Bb-electronics ADAM-6541 - Datasheet Manuel d'utilisateur télécharger pdf

Features

www.advantech.com/products

Online Download

 Supports 1-port 100 Mbps multi-mode ﬁber optic (ADAM-6541)

 Supports 1-port 100 Mbps single strand ﬁber optic (ADAM-6542)

 Supports full/half duplex ﬂow control

 Supports Integrated Loop-up engine

 Supports MDI/MDI-X auto crossover

 Provides broadcast storm protection

 Supports +10 ~ 30 V

voltage power input

 Provides surge protection 3,000 V

for power line

 Provides ﬂexible mounting: DIN-rail, panel, piggyback

 Supports operating temperatures from -10 ~ 65° C

 Embedded a switch controller-supports auto-negotiation

 Embedded a memory buffer-supports store and forward transmission

ADAM-6541

ADAM-6542

Speciﬁcations

Communications

 Standard IEEE 802.3, 802.3u, 802.3x

 LAN 10/100Base-TX, 100Base-FX

 Transmission Distance

Ethernet : 100 m

Fiber: ADAM-6541 2 km

ADAM-6542 20 km

 Transmission Speed Ethernet: up to 100 Mbps

Fiber: 100 Mbps

Interface

 Connectors 1 x RJ-45

1 x SC type ﬁber optic connector (ADAM-6541,

ADAM-6542/W13, ADAM-6542/W15)

1 x ST type ﬁber optic connector (ADAM-6541/ST)

 LED Indicators ADAM-6541: Power, Full/Link (100Base-FX),

100/10 M (Ethernet)

ADAM-6542: Power, Link (100Base-FX),

100/10 M (Ethernet)

Power

 Power Connectors 2-pin removable screw terminal

 Power Consumption Max. 3 W

 Power Input Unregulated 10 ~ 30 V

Mechanism

 Dimensions (WxHxD) ADAM-6541 : 70 x 112 x 27 mm

ADAM-6542 : 70 x 115 x 27 mm

Enclosure IP30, ABS+PC with solid mounting hardware

 Mounting DIN 35 rail, stack, wall

Protection

 Isolation Protection 1,500 V

rms

(Ethernet port)

 Surge (EFT) Protection 3,000 V

(Power)

Environment

 Operating Temperature -10 ~ 65° C (14 ~ 149° F)

stack : -10 ~ 60° C (14 ~ 140° F)

 Storage Temperature -20 ~ 80° C (-4 ~ 176° F)

 Operating Humidity 20 ~ 95% (non-condensing)

 Storage Humidity 0 ~ 95% (non-condensing)

MTBF 550,000 hrs

Certiﬁcations

Safety UL 60950-1, CAN/CSA-C22.2 No.60950

EMC U.S.A.: FCC Part 15 CISPR 22

EU: EN55011

EN55022 Class A,

EN61000-3-2/3

EN55024

IEC61000-4-2/3/4/5/6/8/11

Ordering Information

 ADAM-6541 10/100 Base-TX Ethernet to 100 Base-FX Multi-mode

SC Type Fiber Optic Converter

 ADAM-6541/ST 10/100 Base-TX Ethernet to 100 Base-FX Multi-mode

ST Type Fiber Optic Converter

 ADAM-6542/W15 10/100Base-TX Ethernet to 100Base-FX WDM Single

Strand Fiber Optic Converter (Tx:1550nm, Rx:1310nm)

 ADAM-6542/W13 10/100Base-TX Ethernet to 100Base-FX WDM Single

Strand Fiber Optic Converter (Tx:1310 nm, Rx:1550nm)

Ethernet to Multi-mode Fiber Optic

Converter

Ethernet to Single Strand WDM Fiber Optic

Converter

Introduction

ADAM-6541 and ADAM-6542 are industrial-grade converters designed to convert Ethernet networks to ﬁber networks. It does so by transparently converting Ethernet signals to optic

signals. The advantages of ﬁber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541 and ADAM-6542 are ideal solution for

“ﬁber to building” applications at central ofﬁces or local sites.

ADAM-6542 uses WDM (Wavelength Division Multiplexing) technology, which increases the information-carrying capacity of ﬁber by multiplex transmission and reception of signals

at different wavelengths on a singles strand cable. WDM technology is implemented in couples. One site uses an ADAM-6542/W15 where the transmission channel is 1550nm and

the reception channel is 1310nm. The other site installs an ADAM6542/W13 where the transmission channel is 1310nm and the reception channel is 1550nm. Both the transmission

and reception channels of ADAM-6542/W15 and ADAM-6542/W13 are multiplexed to a single strand cable. This means that cabling costs are halved when you use ADAM-6542/W15

and ADAM-6542/W13 instead of a dual ﬁber converter.

ADAM-6541 and ADAM-6542 support MDI/MDIX auto detection, so you don’t need to use crossover wires. It also includes a switch controller that can sense the transmission speed

(10/100 Mbps) automatically. Both the Ethernet port and the ﬁber port have memory buffers that support store-and-forward mechanisms. This assures data cane be transmitted

properly.

ADAM-6541ADAM-6542

ADAM-6541 1
ADAM-6542 1

Résumé du contenu

Page 1 - ADAM-6542

Featureswww.advantech.com/productsOnline Download Supports 1-port 100 Mbps multi-mode ﬁber optic (ADAM-6541) Supports 1-port 100 Mbps single stran

Commentaires sur ces manuels

Pas de commentaire

Bb-electronics ADAM-6541 - Datasheet Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires de communication Bb-electronics ADAM-6541 - Datasheet. B&B Electronics ADAM-6541 - Datasheet User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de communication Bb-electronics ADAM-6541 - Datasheet